This mini laser engraver is high speed intelligent CNC laser engraving machine applied for home DIY , the max. engraving area is 80mmx80mm, max. depth 3mm. USB connect off-line operation.
- Material: ABS (Acrylonitrile Butadiene Styrene plastic)
- Laser power: 1000mW /1500mW/3000mW (The more power, the faster speed, and deeper engraving depth)
- Input Voltage： 100-240V 50-60Hz
- Output Voltage: 5V/2A (1000mW), 8V/2A(1500mW), 12V/2A(3000mW)
- Engraving area: 80 * 80mm
- Engraving depth: 1mm * 3mm
- Color: Purple&Black
- Size: 15 * 15.5 * 14cm
- Power cord’s length: 116cm
- USB cable’s length: 120cm
- Plug type: US Plug, EU Plug, AU, UK Optional
- Applicable range: Plane surface
- Supporting systems: Windows XP/7/8/10
Supporting image format: JPEG/ JPG/ PNG/ BMP
Difference among 1000mW/1500mW/3000mW
- Engrave speed – the 1500mW is 1.5times faster than 1000mW, and 3000mW is 3times faster than 1000mW
- Safe Continuously working hours – 1000mW 0.5hours, 1500mW 1hours, 3000mW-2-4hours
- Engrave depth: 1000mW -0.1mm to 1mm, 1500mw -0.1mm to 1.5mm, 3000mw-0.1mm to 3mm
- Can carve the following materials: Plane surface of Bamboo, wood, plastic, leather, ABS, Rubber, Paper, Coated metal etc.
- Can NOT carve the following materials: Curve surface material, Metal, glass, crystal etc.
How to use the small engraver?
- Connect the laser graver with computer.
- Install the software.(see more details in the manual)
- Open the software.
- Choose or import a picture, edit it. Make sure the pic is in the middle of the engrave area, adjust the laser pole (this is important, otherwise the failure of engraving may happen)
- Start engrave.
*Please connect the graver to computer before install the software, otherwise the graver is unable to function correctly.
- 1 x Mini Laser Engraver
- 1 x USB Disk
- 1 x Screw Driver
- 4 x Screws
- 4 x Screw Caps
- 1 x Power Cord
- 1 x USB Cable
- 2 x Wooden Board
- 2 x Paper Board
- 1 x Protective Lens
- 1 x Manual